Installation NEWS · Aruba
LIVI supplied and supported the installation of an H-type layer cage system for an open-sided poultry house planned for approximately 20,000 laying hens in Aruba.
This project uses a 4-tier, 3-row H-type layer cage arrangement. The final equipment layout was planned around the 20,000-bird target, the available poultry house and Aruba's warm coastal conditions. This page records the installation stage; it does not claim guaranteed egg-production, labor-saving or investment-return results.
What Was Planned for the Aruba Layer Farm?
The customer required a commercial layer farming system that could use the available poultry house space efficiently while keeping cage inspection, feeding, drinking, manure management and egg handling accessible.
| Bird type | Laying hens |
|---|---|
| Planned farm capacity | Approximately 20,000 birds |
| Primary equipment | H-type layer cage system |
| Reference arrangement | Four tiers and three cage rows |
| Project support | Equipment layout and on-site installation guidance |
| Project status shown | Equipment installation stage |
Configuration note: A 20,000-layer project does not always use the same cage quantity or poultry house layout. The final arrangement depends on cage model, usable capacity per unit, poultry house dimensions, passage width and supporting equipment.
Why an H-Type Layer Cage System Was Considered
For a commercial farm of this size, both A-type and H-type systems may be considered. The decision should be based on the poultry house, budget, labor, land availability and automation requirements—not on bird capacity alone.
The multi-tier H-type structure accommodates cage rows vertically and can increase the usable bird capacity within the available house footprint.
The cage rows can be connected with automatic feeding, nipple drinking, belt manure removal and egg collection equipment.
A coordinated row layout can make later equipment management and commercial farm expansion easier to evaluate.
Learn more about the configuration and application of the H-type layer chicken battery cage system .
Design Priorities for an Open-Sided House in Aruba
Aruba's warm coastal conditions make airflow and heat management important parts of the farm design. In an open-sided poultry house, the cage arrangement must work with the natural ventilation path instead of blocking it.
- Cage row spacing: passages must support airflow, inspection and maintenance.
- House orientation: local wind direction and solar exposure should be considered.
- Water supply: nipple drinking pressure and clean water availability must remain stable.
- Heat management: additional fans or cooling equipment may be required during hotter periods.
- Corrosion management: coastal humidity and cleaning practices should be considered when selecting surface treatment.
- Manure removal: frequent removal helps limit moisture and ammonia accumulation beneath the cages.
What the Installation Support Covered
LIVI provided on-site guidance to help the customer's local team understand the installation sequence and the connection between the cage structure and supporting equipment.
- Confirm cage row positions and operating passages.
- Assemble and align the H-type cage frames.
- Install feed troughs and feeding components.
- Connect nipple drinking pipes and water regulation components.
- Install and check the manure removal equipment included in the order.
- Inspect equipment alignment before trial operation.
- Explain routine operation, cleaning and maintenance to the local team.
Important: The final equipment scope must follow the signed quotation and packing list. Equipment that is not confirmed in the order should not be presented as part of the completed project.
How the H-Type Layer Cage System Supports Farm Management
For this 20,000-layer project, the value of the H-type cage system is not limited to accommodating birds. Its structured cage rows create a clearer operating path for feeding, drinking, manure removal, egg handling and daily inspection.
The multi-tier arrangement uses the vertical space of the poultry house, allowing the planned capacity to be organized within fewer cage rows.
Feeding, nipple drinking, manure removal and egg collection equipment can be arranged along the same cage rows for more orderly operation.
Manure belts beneath the cage tiers separate manure from the birds and allow it to be removed from the poultry house on a planned schedule.
Easier Inspection and Maintenance
Clearly planned passages give farm workers access to the cage rows, drinking lines, feed system and mechanical components. This makes routine inspection, cleaning and maintenance easier to organize.
A Practical Base for Future Automation
When the cage layout and supporting equipment are planned together, the farm has a clearer basis for adding or upgrading automatic feeding, egg collection, manure removal and environmental control equipment as operating requirements develop.
Frequently Asked Questions
Is an H-type cage always required for a 20,000-layer farm?
No. Both A-type and H-type systems may be suitable. The decision depends on poultry house size, land, budget, labor and required automation.
Can H-type layer cages be used in an open-sided poultry house?
Yes, but the row spacing, number of tiers, local airflow, heat conditions and manure management must be evaluated before confirming the layout.
What information is needed to calculate the cage quantity?
The supplier needs the bird capacity, cage model, poultry house length, width and height, required passages and supporting equipment configuration.
What equipment can be connected to an H-type layer cage system?
Depending on the project, the system can include automatic feeding, nipple drinking, belt manure removal, egg collection, ventilation and environmental control equipment.
Send us your project country, planned capacity and poultry house dimensions. LIVI can prepare a preliminary cage arrangement and supporting equipment configuration for your farm.
Contact LIVI on WhatsApp Submit Project Details
